Vacuum Degassing System
Vacuum Degassing System
| Minimum Order Quantity | 2 Piece |
| Power Consumption | 230 VAC |
| Production Capacity | 200 PER MONTH |
| Feature | High Vacuum Pump |
| Frequency | 502-60 Htz |
| Voltage | 230 |
| Motor Speed | 2200 Rpm |
| Dimension | 300x 400x 500 mnm |
| Surface Finish | matt |
| Motor | 2 HP |
| Operation | MANUAL |
| Packaging Type | Wooden |
| Phase | 1 |
| Air Pressure | vacuum |
| Power Source | vacuum |
| Structure | circular |
| Capacity | 50 cfm |
| Weight | 120 kg |
| Noise Level | 60 db |
| Warranty | 1 year |
| Usage/Application | degassing |
| Country of Origin | Made in India |
Vacuum systems (vacuum chamber and vacuum pump that pulls 29 inches of mercury) are used to remove the air from high viscosity materials like silicone rubber before pouring.
They are also ideal for vacuum degassing liquid plastic for making bubble free castings.
This easy to use vacuum chamber is tough aluminum. The lid is made from shatter resistant acrylic and features a rubber gasket that creates a positive, air tight seal for maximum vacuum. Inside dimension of vacuum chamber; 11.5" diameter opening x 6" height Comptible pump : 2CFM, 2 Stage
- Item Code: dgc200
- Production Capacity: 200
- Delivery Time: 3 week
- Packaging Details: wooden
SILICON DEGASSING CHAMBER WITH VACUUM PUMP KIT
| Minimum Order Quantity | 1 Piece |
| Capacity | 5 litre |
| Material | Stainless Steel |
| Power Consumption | 6 unit |
| Production Capacity | 500 per Month |
| Feature | Made Of SS 304 |
| Frequency | 50 Htz |
| Voltage | 230 VAC |
| Gasket | Viton |
| Top | Acrylic |
| Thickness | 4 mm |
| Chamber | 5 Ltr |
| Aone Scientific | Mirror finish |
| Country of Origin | Made in India |
Aone Scientific's
VACUUM DEGASSING
SUGGESTED METHODS AND ADVICE
Typical materials that can be degassed:
RTV Silicone Rubber
Araldite
Polyester Resin
Plastosals
Casting Plaster
Polysulphide Rubber
Polyurethane Resin
Adhesive Mixes
Epoxy Resins
Investment Plaster
When any of the above listed materials are mixed with the required additives, accelerators, filler etc., then air bubbles can become trapped within the mixture. If not removed before the material cures the air bubbles can cause defects such as nodules, cavities and hollows in the finishes cast. With electrical and electronic encapsulation then these air bubbles can cause electrical breakdown. On intricate castings additional work will be required to correct the defects caused by the air bubbles.
All Epoxy Resins, Araldites, Silicone Rubbers as well as any other mixed materials to be degassed will expand during the degassing process. It is essential that a container of sufficient volume is used. It is not uncommon for materials to expand two to six times their initial volume while degassing. As the bubbles burst at the surface the expansion decreases. This process can take several minutes depending on the viscosity of the material, the speed of the vacuum pump and the volume of the vacuum chamber.
Do take heed of both the viscosity and the pot life of the materials to be degassed. Materials with a very high viscosity will take a lot longer. Some very high viscosity materials will be very difficult to degas. If the pot life is short then speed could be essential.
- Item Code: AONEDGC5
- Production Capacity: 500 PER MONTH
- Delivery Time: READY
- Packaging Details: BOX
Leak Test Apparatus
| Minimum Order Quantity | 1 Piece |
| Aone Scintific | 15 Kg |
| Country of Origin | Made in India |
Leak Test Apparatus is a solid state instrument designed for the leakage testing of food, drug and other industrial chemical products. The instrument is used to test the quality of packing processes in strips, blisters and sachets containing tablets, granulates and liquids.
The Instrument is equipped with microcontroller based 4 digit seven segment bright red LED display. Soft touch keys provides a convenient user interface.
The unit contains a polycarbonate desiccator housing to sustain the vacuum for long time. A compact vacuum pump for creating high vacuum level in short time period is used. A vacuum gauge on the front panel of the instrument indicates the vacuum level. The vacuum gauge is connected to a control valve that isolates the vacuum inside desiccator from the vacuum source.
Test samples to be analyzed are placed into the polycarbonate desiccator housing. A vacuum pump generates vacuum inside the desiccator. The vacuum generated is held for a pre-set time, and then released manually. The test samples being analyzed should retain their shape during this test, indicating the sealing is correct. Secondly, as the strip/bottles under test are immersed in a colored dye solution (normally Methylene Blue). The venting of the desiccators will allow any holes to be penetrated by the dye and the contents of the flexible packaging will also be stained with the same coloring material.
Specifications
Vaccum Range 150 – 650 mm of Hg
Vaccum Setting Vacuum can stabilize for a set value less than 400 mm Hg
± 10 mm Hg within 30 seconds
Desiccator 6”, 10”, 12” (Please specify while ordering)
Display 4-Digit Seven Segment Bright Red LED
Keyboard Soft touch keys
Hold Time 1 – 9999 Secs
Power 230V ±10% AC, 50Hz, 10W
Weight 13 Kg. (Approx.)
Accessories Main Apparatus along with vacuum pump
Polycarbonate desiccator along with connecting tubes
Operation Manual
- Item Code: LTA500
- Production Capacity: 5
- Delivery Time: 1-2 WEEK
- Packaging Details: BOX
Explore more products
10x10 mm Square Dry Pellet Pressing Die Set
Get Best Quote5x5 Mm Dry Pellet Die Set
Get Best QuoteLab Presses & Toolings For Cosmetic Powder Pressing
Get Best QuoteOil Patch Testing Kit NAS Oil Test Kit
Get Best QuoteHPLC Consumables Hplc Column End Plug
Get Best QuoteHydrothermal Autoclave 500 Ml
Get Best Quote